Medical sanitary diaphragm valve

Medical sanitary diaphragm valve test: Lining layer: electric spark detection test and inspection according to GB/T13927 standard Nominal pressure: PN(MPa) Valve body: PN×1.5 Sealing: PN×1.1 Purpose of sanitary diaphragm valve: Sanitary diaphragm valve is specially used for opening, closing and throttling on various pipelines or equipment that control pharmaceutical, drinking and food media. Medicinal sanitary ...
Read More

Sanitary T-type three-way diaphragm valve

Details of sanitary T-type three-way diaphragm valve: Maximum working pressure: 6 kg (Diaphragm is Ethylene Propylene rubber or Fluorinated rubber or Fluorinated rubber) 4 kg (diaphragm is PTFE) Maximum operating temperature: 150°C (according to operating conditions ) Diaphragm material: EPDM\PTFE; EPDM Valve body material: 316L Connection mode: welding, cassette, flange, thread Specification: DN25-DN50 Standard: ISO; ...
Read More

Manual sanitary diaphragm valve

Name: Manual sanitary diaphragm valve Specification: DN15~DN80 1. Product certification: ISO9001, CE, CCC 2. Valve body material: 316/316L 3. Drive type: pneumatic control (normally open, normally closed, double-acting) 4. Maximum working temperature: 150℃ 5. Ambient temperature: -10℃~60℃ 6. Maximum working pressure: 10bar 7. Drive mode: manual 8. Sealing material: PTFE, Nitrile non-toxic rubber 9. Applicable ...
Read More

GMP/SAP diaphragm valve

The main valve locates different welding combination 1) GMP valve GMP valve (abbreviation for Good Manufacturing Practice) is mainly used in high purity water or other distribution system with water point vertical pipe, which can effectively reduce the dead Angle of pipeline. There are two types of valves designed by GMP: one is the zero ...
Read More
GMP SAP diaphragm valve

GMP/SAP pneumatic diaphragm valve

Product introduction The design of the welded sectional diaphragm valve is based on GMP specification to reduce the dead Angle and improve the process flow of sanitary production equipment. Welding combined diaphragm valve can be made very simple single valve and pipe combination, can also make it very complicated, different size of the valve body ...
Read More

Tank bottom diaphragm valve

Product introduction The standard design of the bottom valve is to carry only one seat exit. In addition, many functional forms of tank bottom valves are available for different applications, such as sampling, disinfection, and multiple export structures to standardize these products. The preferred way to install the bottom valve is to weld it directly ...
Read More

3 way t type diaphragm valve

Application shows that T一 type valve body is welded to a circular tube in a liquid or pure water system. This technique can be used for sampling or water use without a dead Angle.In addition, according to the requirements of the process, the mixing of two media can also be carried out. It is important ...
Read More

Manual welding diaphragm valve DN25-80mm(3/8″)

Product features · Stainless steel valve cover and high temperature resistant engineering plastic hand wheel · With valve position indicator on the spot check up the hand wheel · (the following valve body between the diaphragm and the valve body has a fixed seal ring · The flexible diaphragm suspended structure · The diaphragm body ...
Read More

Manual welding diaphragm valve DN10-20mm(3/8″一3/4″)

Product features · Lift handwheel · Seal valve cover with local valve position indication · Adjustable closing limit · The body diaphragm and valve body have a fixed seal ring · Flexible diaphragm suspension structure Control mode Manual Maximum operating pressure 10 bar Maximum operating temperature 160℃ Diaphragm material EPDM、PTFE valve body material wrought stainlesssteel  ...
Read More