Product features
· High cycle piston stainless steel pneumatic actuator
· The design is compact, and the outer diameter of the pneumatic head is the same as the valve cover flange of the diaphragm
· Suitable for multi-channel body and multi-valve assembly installation
· The inlet direction is in line with the working medium
· A fixed seal ring between the valve body diaphragm and valve body
· Flexible diaphragm suspension structure
· Covered body diaphragm
· The outer surface of the clean and polished actuator is well suited for post-sterilization
Optional accessories
· Optional multiple control accessories
· The inlet direction can be adjusted to 90 degrees with the working medium
· High pressure disinfection
Technical parameters
| Control mode | Pneumatic normally closed, pneumatic normally open, double acting | |
| Maximum operatingpressure | EPDM | PTFE |
| 10 bar | 8 bar | |
| Maximum operating temperature | 150℃ | |
| Diaphragm material | EPDM、PTFE | |
| Valve body material | Pneumatic normally closed | pneumatic normally open Double job |
| 4.5-7 bar | 4-5 bar | |
| Connection method | wrought stainlesssteel 1.4435/316L、ASME/BPE wrought staiinlesssteel 1.4435/316L Other alloy |
|
| Connection method | wrought stainlesssteel 1.4435/316L、ASME/BPE wrought staiinlesssteel 1.4435/316L Other alloy |
|
| Cover is suitable for | Two-way valve body Welded sectional body T type valve body Multi-channel valve bady Tank bottom valve body |
|
| Size off the diaphragm | MA See the table below for details | |
Different actuators can achieve higher working pressure
| Model | d | D | D1 | L | A | H | Actuator |
| DN08 | 8 | 25.2 | 20.2 | 89 | 64 | 122 | 50 |
| DN10 | 10 | 25.2 | 20.2 | 89 | 64 | 122 | 50 |
| DN15 | 15 | 43.5 | 50.5 | 108 | 80 | 145 | 63 |
| DN20 | 19 | 118 | 100 | 167 | 80 | ||
| DN25 | 22.6 | 130 | 100 | 170 | 80 | ||
| DN32 | 28 | 150 | 100 | 175 | 80 | ||
| DN40 | 36 | 161 | 126 | 225 | 100 | ||
| DN50 | 50 | 56.5 | 64 | 172 | 126 | 238 | 100 |
