Product introduction

The standard design of the bottom valve is to carry only one seat exit. In addition, many functional forms of tank bottom valves are available for different applications, such as sampling, disinfection, and multiple export structures to standardize these products. The preferred way to install the bottom valve is to weld it directly to the jar. The direct installation of the valve and tank greatly reduces the amount of the medium, which is the most important standard for using a tank bottom valve. However, if the tank bottom valve needs to be removed from the tank, a flange connection or clamp connection may be selected between the valve and the tank. The interface of the valve outlet of the bottom valve is: welding connection, health card coupling.

Application specification

The tank bottom valve is mainly used in biological pharmacy, food and beverage and cosmetics, etc. The inner surface is smooth and free of dead zones, preventing the retention of the medium and avoiding the potential process pollution. The tank bottom valve has the same characteristics and functions as the standard diaphragm valve and USES the same valve components, such as actuator, diaphragm, etc. Tank bottom valves are usually soldered directly to the bottom of the tank and can be soldered to the tank wall as a tank wall valve or sample valve.
The typical application of tank bottom valve is to realize the discharge, emptying, sampling, cleaning, disinfection, washing and separation of the material in the tank.

Product features

· Tank bottom valve body is made of precision casting of stainless steel material
· Body material is 1.4435/316L stainless steel
· Can provide stainless steel forging or other alloy steel body
· Zero dead Angle, no dead zone
· Optional lengthened manual lever